膜科学与技术

Position：Home >> Abstract

Preparation and characterization of Function researches about PSf/PPESK blending ultrafiltration membranes

Authors： YU Lanzhe¹, TANG Chengcheng ¹, YUN Yanbing ¹, WANG Lihua ²

Units： 1 College of Environmental Science and Engineering, Beijing Forestry University, 100083, China;

KeyWords： ultrafiltration membrane；blend；PSf；rejection；flux of pure water

ClassificationCode：TQ31

year,volume(issue):pagination： 2011,31(2):89-94

Abstract：

：The blend ultrafiltration membrane was made using polysulfone (PSF) and poly(phthalazinone ether sulfone ketone) (PPESK) as membrane material by liquid-solid phase inversion method. The effects of blend ratio, polymer concentration and additive concentration upon the fluxes and BSA retention were investigated. The experimental results showed that the optimal preparation parameters were the polymer concentration 12％, blending ratio (m(PSF)／m(PPESK)) 7/3, PEG-4000 as additive content, the coagulation bath temperature 50℃ and evaporation time 10s. The flux of PSf/PPESK membrane was 1930 L/ (m2h) and 58.2% rejection to BSA.
This thesis researched ultrafiltration membrane prepared by using L-S phase inversion method with mixed PSf and PPESK materials. On the basis of the blend method, the effects of blend ratio, polymer concentration, additive concentration etc. were investigated by the flux of pure water and rejection of BSA. The optimized conditions were as follow, the blending ratio of PSf/PPESK: 7/3, the concentration of the blend polymer: 12%, solvent: NMP, additive: PEG4000, the temperature of coagulation bath: 50℃, the evaporation time: 10s. The pure water flux of the membrane is 1.93m3/(m2•h•0.05Mpa), the rejection of BSA is 58.2?%.

Funds：

国家林业局948项目（2009-4-62）；中央高校基本科研业务费专项基金资助

AuthorIntro：

于兰哲(1985-),女，内蒙古呼伦贝尔人，硕士研究生，研究方向为膜材料及分离.*通讯联系人：1.贠延滨，副教授，主要研究方向膜材料制备与表征。电话：13241730890，E-mail：ybyunbj@sohu.com；2.王丽华，博士后，副研究员。主要研究方向为膜分离。电话：13552822660， Email: wanglh@iccas.ac.cn。

Reference：

[1] 华耀祖. 超滤技术与应用[M]. 北京：化学工业出版, 2004: 269-364.
[2] 王湛. 膜分离技术基础[M]. 北京：化学工业出版社, 2000: 207.
[3] 魏菊, 张守海, 蹇锡高. 聚醚砜酮合金超滤膜的制备及表征[J]. 膜科学与技术, 2007(1): 51-55.
[4] 俞三传. 多元合金超滤膜研制[J]. 膜科学与技术,2001,4:10-13.
[5] 谭翎燕, 刘金盾, 张浩勤,等. 磺化聚醚砜（SPES）/聚砜（PSF）共混超滤膜的研制[J]. 化工进展, 2007，(6): 864-868.
[6] Carsten Blicke, Peinemann K V, Nunes S P. Ultrafiltration membrane forrom poly(ether sulfoneamide)/ poly(ether imide) blends[J]. J Membr Sci,1993，（79）: 83-91.
[7] Yoo J E , Kim J H, Kim Y. Novel ultrafiltration membranes prepared from the new miscible blends of polysulfone with poly(1-vinylpyrrolidone-co-styrene).copolymers[J]. J Membr Sci, 2003，（216）: 95-106.
[8] 孙漓青, 钱英, 刘淑秀,等. 聚偏氟乙烯/磺化聚砜共混相容性及超滤膜研究[J]. 膜科学与技术, 2001(2):1-5.
[9] 于志辉, 钱英, 付丽,等. 聚偏氟乙烯/聚丙烯腈共混超滤膜的研究[J]. 膜科学与技术, 2000(5):10-15.
[10] Chung T S, Xu Z L. Asymmetric hollow fiber membranes prepared from miscible polybenzimidazole and polyetherimide blends[J]. J Membr Sci, 1998，（147）:35-47.
[11] 邓晓玲, 姜佩华, 迟莉娜. 聚氯乙烯/聚砜共混中空纤维超滤膜的研制[J]. 东华大学学报, 2003, 10:1-4.
[12] 贠延滨, 李继定, 陈翠仙. PVPK30和Tween80对中空纤维超滤膜结构和性能的影响[J]. 水处理技术, 2006, 32(1): 14-17.
[13] 杨永强, 杨大令, 张守海,等. 高性能中空纤维超滤膜结构和性能研究[J]. 现代化工, 2005, 25(5): 44-48.
[14] 张欣涛. 含二氮杂萘酮结构聚醚砜酮共混及填充改性[D]. 大连：大连理工大学, 2008.
[15] 张守海, 蹇锡高, 杨大令,等. 含二氮杂萘酮结构聚芳醚砜酮超滤膜的研制[J]. 膜科学与技术, 2004,1(24):24-27.
[16] 戴英. 新型耐高温聚醚砜酮分离膜的研制[D]. 大连：大连理工大学, 1998.

Service：

【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com