Influence of the Membrane Module’s Structure on the Nanofiltration Separation |
Authors: ZHANG Peng-xing, CHEN Zhi, ZENG Fan-su, CAO Lei, LI Jian-ming |
Units: School of Chemical Engineering, Sichuan University, Chengdu 610065, China |
KeyWords: nanofiltration membrane; flow passage structure; filtration performance |
ClassificationCode:TQ 028.8 |
year,volume(issue):pagination: 2012,32(3):28-33 |
Abstract: |
In order to investigate the effects of the three kinds of membrane module’s structures on the NF separation, such as permeate flux and observed rejection, three self-designed flat-plate NF membrane modules and a kind of commercial nanofiltration membrane were used to carry out the experiments. It is shown, from the experimental results of three kinds of membrane module systems (the spiral flow type, the serpentine flow type and the normal flow type), that at the same operating condition, permeate flux is strongly affected by the concentration polarization on the membrane surface, and the flux of the spiral flow module is the largest due to the disturbance of the secondary flows to the concentration polarization, then is that of the serpentine flow module, and follows by that of the normal flow module. When the flow is laminar, the permeate flux of the spiral flow module is about 2 times greater than that of the serpentine flow module. When the flow is turbulent, the permeate flux of the former is about 1.6 times larger than that of the latter. It is also shown that the structures of the membrane module and the permeate flux have great influence on the solute rejection. When the flow is laminar, the Mg2+ rejection of the normal flow module is the greatest, say, up to 94.2%, and that of the spiral flow module is larger than that of the serpentine flow module. When the flow is turbulent, the Mg2+ rejection of the latter is greater than that of the former, e.g. up to 97.1%, for the effect of the secondary flow on the concentration polarization becomes relatively weaker. |
Funds: |
AuthorIntro: |
章鹏兴(1986-),男,江西余干人,四川大学在读硕士研究生。 通讯联系人:E-mail:lijianming@scu.edu.cn |
Reference: |
[1]王志,甄寒菲,王世昌,伍登熙. 膜过程中防治膜污染强化渗透通量技术进展 (Ⅰ)操作策略[J]. 膜科学与技术, 1999,(01) . [2]伍艳辉, 王志, 伍登熙, 等. 膜过程中防治膜污染强化渗透通量技术进展(Ⅱ)膜组件及膜系统的结构设计[J]. 膜科学与技术, 1999,(04) [3]Renkin E M. Filtration, diffusion and molecular sieving through porous cellulose membranes. J Gen Physiol, 1954, 38: 225~ 232. [4]戴干策,任德呈,范自晖.传递现象导论[M].北京:化学工业出版社,1996. [5]E•L•柯斯乐.扩散流体系统中的传质[M].北京:化学工业出版社,2002:144. [6]钢制管法兰、垫片、紧固件HGJ44~76-91.北京: 1991. [7]黄卫星,陈文梅.工程流体力学[M].北京:化学工业出版社,2001:180. [8]黄卫星,李建明,肖泽仪.工程流体力学[M].北京:化学工业出版社,2009:31. [9]彭辉.操作因素对纳滤膜分离性能的影响 [D].成都:四川大学,2005:30-43. [10]Timmer J. M. K., Van der Horst H. C., Robberten T. Transport of lactic acid through reverse osmosis and nanofiltration membranes [J]. J Mebr Sci, 1993, 85 (1): 205-216. [11]Dean W. R.. Fluid motion in a curved channel [J]. Proc Roy Soc A, 1928, 121: 402-420. |
Service: |
【Download】【Collect】 |
《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone:010-80492417/010-80485372; Fax:010-80485372 ; Email:mkxyjs@163.com
京公网安备11011302000819号