膜科学与技术

Position：Home >> Abstract

Hydraulic research of H circulating pipe in airlift external circulation membrane bioreactor

Authors： ZHANG Qing, FAN Yaobo*, XU Rongle

Units： Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085

KeyWords： airlift external circulation membrane bioreactor, H circulating pipe, computational fluid dynamics

ClassificationCode：X703.1

year,volume(issue):pagination： 2014,34(1):39-45

Abstract：

In this study, computational fluid dynamics (CFD) was implemented to study the hydrodynamic characteristics of H circulating pipe in airlift external circulation membrane bioreactor (AEC-MBR). The role of H circulating pipe and the effect of different diameters of H circulating pipe on circulation were modeled and analyzed. Furthermore, formula of circulation flow velocity in H circulating pipe was deduced. The results showed that H circulating pipe was necessary and played an important role in the AEC-MBR, and that an increase in the diameter of H circulating pipe led to an increase in the mass flow rate between the membrane unit and the aeration tank. The mean flow velocity in H circulating pipe reached a maximum when D/L=22.2%. An equation was derived for determining the velocity of the circulation flow in the H circulating pipe as U=1/n R^(2/3) [(H_0/l)(Q_a1/(v_1 A_1 )-Q_a2/(v_2 A_2 )) ]^(1/2).The results and research method provide by this paper can be used as a reference for further hydraulic study of MBR.

Funds：

国家自然科学基金“MBR 流场、传质与能耗的相互关系研究”（51278483)，环境模拟与污染控制国家重点联合实验室（环境水质学实验室）课题“计算流体力学（CFD）及其在膜生物反应器技术创新中的应用研究”。

AuthorIntro：

张晴（1987—），女，湖南湘潭，硕士生，研究方向为计算流体力学（CFD）在膜生物反应器（MBR）中的应用研究。E-mail: zhangqing210@mails.gucas.ac.cn。*通讯作者，E-mail: ybfan@rcees.ac.cn

Reference：

[1]樊耀波, 杨问波. H或h循环管分置式膜生物反应器. 中国, CN1318320C[P]. 2004-04-21.
[2]徐慧芳, 樊耀波. 气升循环分体式膜生物反应器再生回用厕所污水的研究[J]. 环境科学, 2003, 24(02): 125-129.
[3]樊耀波, 徐慧芳, 郭海明. 气升循环分体式膜生物反应器污水处理与回用技术[J]. 环境污染治理技术与设备, 2004, 5(7): 70-75.
[4]谢龙汉，赵新宇，张炯明. Ansys CFX流体分析及仿真[M]. 北京: 电子工业出版社, 2012. 1-2.
[5]于艳, 樊耀波, 徐国良, 等. 计算流体力学在膜技术及膜生物反应器研究中的应用[J]. 膜科学与技术, 2011, 31(01): 105-112.
[6]于艳, 樊耀波, 徐国良, 等. 计算流体力学对膜生物反应器水力学特征的模拟研究[J]. 膜科学与技术, 2011, 31(04): 9-16.
[7]张德良. 计算流体力学教程[M]. 北京: 高等教育出版社, 2010. 19-34.
[8]安德森, 吴颂平, 刘赵淼. 计算流体力学基础及其应用[M]. 机械工业出版社, 2007.
[9]Brannock M, Wang Y, Leslie G. Mixing characterisation of full-scale membrane bioreactors: CFD modelling with experimental validation[J]. Water Research, 2010, 44(10): 3181-3191.
[10]Kang C W, Hua J S, Lou J, et al. Bridging the gap between membrane bio-reactor (MBR) pilot and plant studies[J]. Journal of Membrane Science, 2008, 325(2): 861-871.
[11]Prieske H, Drews A, Kraume M. Prediction of the circulation velocity in a membrane bioreactor[J]. Desalination, 2008, 231(1-3): 219-226.
[12]Khalili-Garakani A, Mehrnia M R, Mostoufi N, et al. Analyze and control fouling in an airlift membrane bioreactor: CFD simulation and experimental studies[J]. Process Biochemistry, 2011, 46(5): 1138-1145.
[13]张晴, 樊耀波*, 魏源送, 等. 气升循环分体式MBR的CFD模拟及优化[J]. 膜科学与技术, 2013, 33(4).
[14]李刚. 气升循环分体式膜生物反应器相关机理及工艺优化研究[D]: [学位论文]. 北京: 中国科学院研究生院, 2006. 38-75.
[15]Naessens W, Maere T, Ratkovich N, et al. Critical review of membrane bioreactor models – Part 2: Hydrodynamic and integrated models[J]. Bioresource Technology, 2012, 122: 107-118.
[16]朱红钧. Fluent 12 流体分析及仿真[M]. 北京: 清华大学出版社, 2011.
[17]Fluent A. Fluent 12.0 user’s Guide[M]. ANSYS, Inc., 2009.
[18]张晴, 樊耀波*, 魏源送, 等. CFD及ASM-CFD在MBR研究中的应用进展[J]. 膜科学与技术, 2013, 33(2).
[19]闻德荪. 工程流体力学: 水力学（下册）[M]. 北京: 高等教育出版社, 2004. 57-68.

Service：

【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com