膜科学与技术

位置：首页 >> 期刊内容阅读

装填分率对溶菌酶溶液膜结晶过程的影响

作者：张扬，刘丽英，张雪，马润宇

单位：北京化工大学生命科学与技术学院

关键词：装填分率；溶菌酶；膜结晶；跨膜通量

DOI号：

分类号： TQ028.8

出版年,卷(期):页码： 2011,31(2):46-49

摘要：

采用三种不同装填分率的聚偏氟乙烯中空纤维微孔膜组件，分别对溶菌酶溶液膜结晶过程进行实验研究，考察了不同装填分率下结晶溶液及洗脱液流速对溶剂跨膜通量和溶菌酶晶体质量的影响。结果表明，由于膜组件中纤维分布不均，导致低装填分率(12.4%)下结晶溶液流速在合适范围内的升高并不能有效提高跨膜通量，而对高装填分率（24.7%）下溶剂跨膜通量的影响不大；不同装填分率下溶剂跨膜通量都随着洗脱液流速的升高而增大。在较低的装填分率下，控制合适的结晶溶液流速及洗脱液流速均可以结晶制得质量较好的晶体。

The PVDF hollow fiber microporous membrane modules with three packing densities were employed to study the influences of the flow velocities of crystallization solution and stripping agent on membrane crystallization of lysozyme. It was found that, due to the different fiber distribution of membranes modules, the increase of flow velocity of crystallization solution in the appropriate range can’t improve effectively the transmembrane flux at a lower packing density(12.4%), and moreover, it had little effect at a higher packing density(24.7%).Transmembrane flux increased as flow velocity of stripping agent increased at different packing density. For the module with lower packing density, high quality crystals have been prepared under the proper flow velocities of crystallization solution and stripping agent.

基金项目：

国家自然科学基金(20676007)

作者简介：

张扬(1983- )，男，天津市人，硕士生，主要从事膜分离研究；*通讯联系人Email：r.ma@mail.buct.edu.cn 。

参考文献：

[1] Curcio E, Criscuoli A, Drioli E. Membrane crystallizers[J]. Industrial and Engineering Chemistry Research, 2001, 40 (12): 2679-2684.
[2] Curcio E, Di Profio G, Drioli E. Membrane crystallization of macromolecular solutions[J]. Desalination, 2002, 145(1/2/3):173-177.
[3] Di Profio G, Curcio E, Cassetta A, et al. Membrane crystallization of lysozyme: Kinetic aspects[J]. Journal of Crystal Growth, 2003, 257 (3 /4): 359-369.
[4] 魏可贵，张新妙，马润宇。蛋白质溶液的膜结晶:膜结晶法结晶溶菌酶的研究[J]．膜科学与技术，2008，28(3)：10-25
[5] Wu Jasmin, Chen Vicki. Shell-side mass transfer performance of randomly packed hollow fiber modules[J]. Journal of Membrane Science, 2000, 172:59-74
[6]Wang Yujun, Chen Fei, Wang Yan,et al. Effect of
random packing on shell-side flow and mass transfer in hollow fiber module described by normal distribution function[J]. Journal of Membrane Science, 2003, 216:81-93
[7]李利君，刘丽英，丁忠伟。装填分率对中空纤维膜组件壳程传质性能的影响[J]．北京化工大学学报，2005，32（3）：1-4.

服务与反馈：

【文章下载】【加入收藏】

《膜科学与技术》编辑部地址：北京市朝阳区北三环东路19号蓝星大厦邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com