连续法合成己二酸二甲酯的膜反应过程研究
作者:张争光,张  飚,彭  勇,余立新
单位: 清华大学 化工系
关键词: 连续;己二酸二甲酯;酯化;耦合;渗透汽化
出版年,卷(期):页码: 2011,31(2):24-27

摘要:
以己二酸二甲酯的连续合成为目标反应,考察渗透汽化膜反应过程中的反应温度、进料流量、渗透汽化膜面积、进料中醇酸摩尔比等主要参数对己二酸转化率的影响。实验表明:温度越高,进料流量越小,膜面积越大,进料中醇酸比越高,酯化反应转化率越高;在醇酸比为4,流量0.24ml/min,膜面积291.6 cm2,反应温度60℃条件下,酯化反应转化率可达到99.2%。
With the continuous synthesis of dimethyl adipate as a target reaction system, the effects of the major operating and apparatus parameters, such as temperature, flow rate, membrane area and feed molar ratio of alcohol to acid, were investigated. It was found from experimental results that high temperature, small feed flow rate, large membrane area and high molar ratio of alcohol to acid are favorable to the conversion ratio of adipic acid. When the parameters are kept at a molar ratio of alcohol to acid of 4, temperature of 60℃, feed flow rate of 0.24ml/min and membrane area of 291.6 cm2, the conversion ratio of the esterification process can be raised to 99.2%
张争光(1983-),男,河南正阳人,硕士生。通讯联系人:余立新,E-mail:yulixin@tsinghua.edu.cn

参考文献:
[1]Sanz M T, Gmehling J. Esterification of acetic acid with isopropanol coupled with pervaporation. Part II. Study of a pervaporation reactor[J]. Chem Eng J, 2006(123):1-8.
[2]刘庆林, 朱玉山, 陈洪钫. 交联聚乙烯醇渗透蒸发膜用于酯化反应过程[J]. 高校化学工程学报, 1997, 11(2):172-176.
[3]Benedict D J, Parulekar S J, Tsai S P. Esterification of lactic acid and ethanol with/without pervaporation[J]. Ind Eng Chem Res, 2003, 42:2282-2291.
[4]David M O, Gref R, Nguyen T Q, et al. Pervaporation-esterification coupling: basic kinetic model[J]. Trans Inst Chem Eng, 1991, 69 (A):335-346.
[5]郭金宝, 杜迎春. 膜技术在酯化反应中的应用[J]. 化工时刊, 2005, 19(12):48-52.
[6]王金厢, 蔡邦肖. 渗透汽化在酯水体系分离中的应用[J]. 化工进展, 2006, 25(6):608-612.
[7]章  龙, 彭  勇, 余立新, 廖康政. 己二酸和甲醇酯化反应与渗透汽化脱水耦合过程的研究[J]. 膜科学与技术, 2008, 28(6):99-101.

服务与反馈:
文章下载】【加入收藏

《膜科学与技术》编辑部 地址:北京市朝阳区北三环东路19号蓝星大厦 邮政编码:100029 电话:010-64426130/64433466 传真:010-80485372邮箱:mkxyjs@163.com

京公网安备11011302000819号