| 含油污水陶瓷膜处理工艺的数值模拟 |
| 作者：安家荣1，宗媛1，吴梁红2，吕亳龙1，张娜1，贾琳1 |
| 单位： 1.中国石油大学（华东）油气储运与建筑工程学院油气储运专业，山东省东营市257061；2.中石油规划总院，北京市100083 |
| 关键词： 含油污水；陶瓷膜；粒子直径；过滤效果；数值模拟 |
| DOI号： |
| 分类号： TE【99】 |
| 出版年,卷(期):页码： 2012,32(3):59-63 |
|
摘要： |
| 陶瓷膜污水处理技术近年来在油田含油污水领域得到了迅速发展，跨膜压差、处理温度以及油滴和悬浮颗粒的浓度都直接关系到膜处理时对离散相粒子直径的选择性和处理效果。本文运用Fluent计算软件在微观上对含油污水的处理条件（包括跨膜压差、温度以及含油污水的浓度）进行了数值模拟研究，结果表明，在适当的跨膜压差下，提高污水处理温度，减小含油污水浓度（进行污水预处理）可以减小膜污染的程度，从而明显地提高污水处理的效果。 |
| The ceramic membrane is widely used in the treatment of oilywater in the recent years. The treatment process of oilywater, including transmembrane pressure differential, processing temperture and the concentration of oil droplets and suspended particle are closely related to particle diameter selecticity of discret phase.This paper simulates the influnce of those factors at a mirolevel using FLUENT software. The results show that under proper transmembrane pressure differential ,membrane pollution is greatly reduced and the flitering effect is greatly improved as well by increaing processing temperature and minimizing the concentration of the oily droplets and suspension particles (pretreatment of oily wastewater). |
|
基金项目： |
|
作者简介： |
| 安家荣，1963年出生，男，山东济宁人，硕士生导师，含油污水控制和长输管道 |
|
参考文献： |
| [1] Xu Nanping，Xing Weihong，Zhao Yijiang． The Seperation Technology and Application of Ceramic Membranes．Beijing：Chemical Industry Press，2003：1 2 [2] Xu Nanping， Li Weixing，ZhaoYijiang，Xing Weihong，Shi Jun． Theory and method of application—oriented ceramicmembranes design (I)： Simulation of relation between membrane permeability and micro—structure．Journal of Chemical Industry and Engineering (China)，2003，54 (9)： 1284—1289 [3] Ghidossi R，Veyret D，Moulin P．Computationa1 fluid dynamics applied to membranes： state of the art and opportunities．Chemical Engineering and Processing，2006，45：437-454 [4] Lee Y,Clark M ．Modeling of flux decline during crossflow ultrafiltration of colloidal suspensions．J．M embrane Sci．1998，149： 181-202 [5] Geraldes V M ，Semiao V ，de Pinho M N．Flow management in nanofiltration spiral wound modules with ladder type spacers. J．Membrane Science， 2002， 203：87—102 [6] Koutsou C P，Yiantsios S G， Karabelas A J．Numerical simulation of the flow in a plane—channel containing aperiodic array of cylindrical turbulence promoters． J．Membrane Science， 2004，231： 81~ 90 [7] Dolecek P．Mathematical modeling of permeate flow in multi-channel ceramic membrane．J．Membrane Science．，1995，100：111 ~119 [8] Darcovich K，Dal cin M M ，Ballevre S，Wavelet J P．CFD-assisted thin channel membrane characterization module design．J．Membrane Science，1997，124：181 193 [9] Dolecek P，Cakl J．Permeate flow in hexagonal 1 9-channel inorganic membrane under filtration and back flush operating modes．J．Membrane Science，1998，149：171—179 [10] Koutsou C P，Yiantsios S G，Karabelas A J．Direct numerical simulation of flow in spacer—filled channels：effect of spacer geometrical characteristics． J．M embrane Science，2007，291：53—69 [11] Peng Wenbo，Qi Hong，Chen Gangling，Zou Linling，Xing Weihong，Xu Nanping．CFD modeling of permeate process in 19 channel porous ceramic membranes．Journal of Chemical Industry and Engineering (China)，2007，58(8)：2021—2026 |
|
服务与反馈： |
| 【文章下载】【加入收藏】 |
《膜科学与技术》编辑部 地址：北京市朝阳区北三环东路19号蓝星大厦 邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com
京公网安备11011302000819号