相转化法制备中空纤维陶瓷膜的研究进展
作者：张瑛洁，庄媛媛
单位： 东北电力大学化学工程学院，吉林 132012
关键词： 中空纤维陶瓷膜；相转化法；烧结
DOI号：
分类号： TQ028.8
出版年,卷(期):页码： 2015,35(4):97-102

摘要：
利用相转化法制备中空纤维陶瓷膜具有操作简单、成膜微观结构可控、一步成型等优点。因此成为目前最常用的中纤维陶瓷膜的制备方法之一。本文首先论述了相转化法的过程，成膜机理，其次介绍了相转化法制膜过程中的影响因素，以及在膜烧结过程中烧结温度、保温时间、升温速率和烧结助剂对膜的影响，最后，对中空纤维陶瓷膜未来的研究方向提供了建议。
 
The preparation of hollow fiber ceramic membranes by phase inversion is simple to operate, feasible to control the microstructureof the membranes. It is one of the most commonly used methods. This paper discussed the process and mechanism of phase inversion and the effect of casting solution, sintering temperature, sintering time, heating rate and sintering additives on the properties of membrane, respectively. The future research direction of hollow fiber ceramic membrane was also proposed.
Key words:

基金项目：
吉林省科技厅产业技术创新战略联盟项目(20130305017GX)，吉林省教育厅吉教科合字[2014]第103号

作者简介：
张瑛洁(1969-)女,教授,博士.主要从事水的深度处理方面的研究.

参考文献：

[1] Wei C C, Li K. Preparation and characterization of a robust and hydrophobic ceramic                                                                                                            membrane via an improved surface grafting technique[J]. Ind Eng Chem Res, 2009, 48(1): 3446-3452.
[2] 方大儒, 张小珍, 刘杏芹,等. 中空纤维陶瓷膜的研制现状与应用前景[J]. 硅酸盐通报, 2009, 28(8): 206-210.
[3] Tan X Y, Pang Zhaobao, Li K. Oxygen production using La0.6Sr0.4Co0.2Fe0.8O3-ɑ(LSCF) perovskite hollow fibre membrane modules[J]. J Membr Sci, 2008, 310(1-2): 550-556
[4] Tan Xiaoyao, Shi Lili, Hao Guizeng, et al. La0.7Sr0.3FeO3-ɑ perovskite hollow fiber membranes for oxygen permeation and methane conversion[J]. Sep Purif Technol, 2012, 96(21): 89-97.
[5] Tan Xiaoyao, Liu Nan, Meng Bo, et al. Morphology control of the perovskite hollow fibre membranes for oxygen separation using different bore fluids[J]. J Membr Sci, 2011, 378: 308-318
[6] Yuan ZouWei, Zhou Shaomin, Liu Zongping, et al. Sintering and oxygen permeation studies of La0.6Sr0.4Co0.2Fe0.8O3−δ ceramic membranes with improved purity[J]. J Eur Ceram Soc, 2011, 31: 2931-2938
[7] Tan Xiaoyao, Song Jian, Meng Xiuxia, et al. Preparation and characterization of  BaCe0.95Tb0.05O3−αhollow fibre membranes for hydrogen permeation[J]. J Eur Ceram Soc, 2012, 32: 2351-2357
[8] Fang Hong, Gao Jie, Wang Hongtao, et al. Hydrophobic porous alumina hollow fiber for water  desalination via membrane distillation process[J]. J Membr Sci, 2012, 403-404: 41-46
[9] 尚双银, 方 宏, 任春雷, 杨萍华, 等. 膜蒸馏海水淡化用疏水性钇稳定氧化锆中空纤维膜的制备与表征[J]. 无机材料学报, 2013, 28(4): 393-397
[10] Tan Xiaoyao, Li K. Inorganic hollow fibre membranes in catalytic processing[J]. Curr Opin Chem Eng, 2011, 1: 69-76
[11] 石丽丽. La0.7Sr0.3FeO3-δ中空纤维膜透氧及催化反应性能研宄[D]. 山东理工大学硕士学   位论文, 2012
[12] 孟光耀, 陈初升, 刘卫,等. 陶瓷膜分离技术发展30年回顾与展望[J]. 膜科学与技术, 2011, 31(3): 86-95.
[13] 李健生, 郝艳霞, 王连军,等. 反应结合制备增强氧化铝中空纤维膜[J]. 无机材料学报,  2002, 17(1): 180-184.
[14] 何吉上, 何 勇, 顾学红,等. α-Al2O3中空纤维支撑体的制备与表征[J]. 膜科学与技术, 2011, 31(2): 19-23.
[15] 张慧鑫, 曹 悦, 马晓华,等. α-Al2O3中空纤维复合膜的制备及其在对甲醇水溶液的分离 [J]. 石油化工, 2013, 42(4): 393-398.
[16] 白 丽. SiO2/Al2O3 复合中空纤维膜的制备与透氢性能研究[D]. 山东: 山东理工大学硕士学位论文, 2010.
[17] 张小珍, 周健儿, 江喻华. 一步成型制备非对称多孔YSZ中空纤维陶瓷膜[J]. 中国陶瓷, 2010, 46(3): 28-30.
[18] 张小珍, 周健儿, 汪永清,等. 高渗透性多孔YSZ中空纤维陶瓷膜的制备与表征[J]. 稀有金属材料与工程, 2011, 40(1): 11-14.
[19] Yang Chunli, Li Wei, Zhang Shanquan, et al. Fabrication and characterization of an anode-supported hollow fiber SOFC[J]. J Power Sources, 2009, 187(1): 90-92.
[20] Zhang Jiangwei, Fang Hong, Wang Junwei, et al. Preparation and characterization of silicon nitride hollow fiber membranes for seawater desalination[J]. J Membr Sci, 2014 450(15): 197-206.
[21] Zhang Jiangwei, Fang Hong, Wang Junwei, et al. Preparation of silicon nitride hollow fiber membrane for desalination[J]. Mater Lett, 2012, 68(1): 457-459.
[22] Tan Xiaoyao, Liu Nan, Meng Bo, et al. Oxygen permeation behavior of La0.6Sr0.4Co0.8Fe0.2O3   hollow fiber membranes with highly concentrated CO2 exposure[J]. J Membr Sci, 2012, 389(1): 216-222.
[23] Tan Xiaoyao, Liu Nan, Meng Bo, et al. Morphology control of the perovskite hollow fiber membranes for oxygen separation using different bore fluids[J]. J Membr Sci, 2011, 378(1-2): 308-318.
[24] Tan Xiaoyao, Song Jian, Meng Xiuxia, et al. Preparation and characterization of BaCe0.95Tb0.05O3-α hollow fiber membranes for hydrogen permeation[J]. J Eur Ceram Soc, 2012, 32(10): 2351-2357.
[25] Tan Xiaoyao, Liu Y T, Li K. Preparation of LSCF ceramic hollow fiber membranes for oxygen production by a phase-inversion/sintering technique[J]. Ind Eng Chem Res, 2009, 44(1): 61-66.
[26] 张小珍. 新型中纤维陶瓷膜的制备研究与性能表征[D]. 安徽: 中国科学技术大学博士学位论文, 2010.
[27] 董应超. 新型低成本多孔陶瓷分离膜的制备与性能研究[D]. 安徽: 中国科学技术大学博士学位论文, 2008.
[28] 曹 悦. 溶胶-凝胶法制备Al2O3中空纤维复合膜及其性能研究[D]. 上海: 华东理工大学硕士学位论文, 2011.
[29] 张 英, 闻荻江, 白占良. 非对称氧化铝陶瓷膜微滤管的制备[J]. 山东陶瓷, 2007, 30(1): 15-18.
[30] Yuan Rusheng, Fu Xianzhi, Wang Xinchen, et al. Template synthesis of hollow metal oxide fibers with hierarchical architecture[J]. Chem Mater, 2006, 18(19): 4700-4705.
[31] Li Jia, Qi Huanyang, Shi Yanping. Applications of titania and zirconia hollow fibers in sorptive micro-extraction of N,N-dimethylacetamide from water sample[J]. Anal Chim Acta, 2009, 651(2): 182-187.
[32] Xu L, Lee K H. Zirconia hollow fiber: preparation, characterization and micro-extraction  application[J]. Anal Chem, 2007, 79(14): 5241-5248. 
[33] 孙良奎, 程海峰, 楚增勇. 静电纺丝制备中空纤维的研究进展[J]. 新技术新工艺, 2008, 7: 83-85.
[34] 刘朋超, 龚静华, 杨曙光,等. 静电纺丝法制备陶瓷中空纳米纤维的研究进展[J]. 无机材料学报, 2013, 28(6): 571-578.
[35] 杨国锐, 延 卫. 静电纺丝法机理及其在无机中空微/纳米纤维制备中的研究进展[J]. 材料导报, 2010, 24(3): 66-71. 
[36] Li Dan, Xia Younan. Direct fabrication of composite and ceramic hollow nano-fibers by electro-spinning[J]. Nano Lett, 2004, 4(5): 933-938.
[37] Toshio S, Toshiaki Y, Yoshinobu F, et al. Fabrication and characterization of microtubular SOFCs for operation in the intermediate temperature[J]. J Power Sources, 2006, 160(1): 73-77.   
[38] Loeb S, Sourirajan S. Seawater demineralization by means of an osmotic membrane[J]. Adv Chem Ser, 1963, 38(9): 117-32.
[39] 张小珍, 周健儿, 江喻华. 新型中空纤维陶瓷膜的制备方法[J]. 陶瓷学报, 2011, 32(1): 124-128.
[40] Wei C C, Chen O Y, Liu Y, et al. Ceramic asymmetric hollow fiber membranes: One step fabrication process[J]. J Membr Sci, 2008, 320(1-2): 191-197.
[41] Smolders C A, Reuvers A J, Boom R M, et al. Microstructures in phase inversion membranes.Part1.Formation of macro-voids[J].J Membr Sci, 1992, 73(2-3): 259-275.
[42] Wang Bo, Lai Zhiping. Finger-like voids induced by viscous fingering during phase inversion of alumina/PES/NMP suspensions[J]. J Membr Sci, 2012, 405(1): 275-283.
[43] Kingsbury B F K, Li K. A morphological study of ceramic hollow fiber membranes[J]. J Membr Sci, 2009, 328(1): 134-140.
[44] 韩灵凤. 中空纤维陶瓷膜的制备过程能表征的研究[D]. 上海: 华东理工大学博士学位论文, 2012.
[45] 罗庆涛. 相转化法制膜过程的膜结构形态调控与优化[D]. 河南: 郑州大学硕士学位论文, 2005.
[46] Koonaphapdeelert S, Li K. Preparation and characterization of hydrophobic ceramic hollow fiber membrane[J]. J Membr Sci, 2007, 291(1-2): 70-76.
[47] 白 丽, 谭小耀. 氧化铝中空纤维陶瓷膜的制备与表征[J]. 山东理工大学学报(自然科学版), 2010, 24(6): 19-21.
[48] Yin Weining, Meng Bo. Highly asymmetric yttria-stabilized zirconia hollow fiber  membranes[J]. J Alloys Compd, 2009, 476(1-2): 566-570.
[49] 张小珍, 周健儿. 多孔堇青石中空纤维陶瓷膜的制备与表征[J]. 硅酸盐学报, 2010, 38(2): 342-346.
[50] Shi Zhenzhou, Zhang Yuting, Cai Chao, et al. Preparation and characterization of ɑ-Al2O3 hollow fiber membranes with four-channel configuration[J]. Ceram Int, 2014, 9(65):1-7
[51] Liu S, Li K, Hughes R. Preparation of porous alumina hollow fiber membranes by a combined phase inversion and sintering method[J]. Ceram Int, 2003, 29(8): 875-881.
[52] Drioli E, Giorno L.Comprehensive Membrane Science and Engineering[M]. United Kingdom, Elsevier B V, 2010, 253-273.
[53] 李健生, 成 岳, 顾志明,等. 多通道陶瓷膜支撑体烧成制度的探讨[J]. 中国陶瓷工业, 2010, 10(5): 9-11.
[54] Wu ZhenTao, Rami F, Li T, et al. A controlled sintering process for more permeable ceramic hollow fibre membranes[J]. J Membr Sci, 2013, 446(1): 286-293.
[55] Zhou Jianer, Zhang Xiaozhen, Wang Yongqing, et al. Elaboration and characterization of tubular macro-porous ceramic support for membranes from kaolin and dolomite[J]. J Porous Mater, 2010, 17(1): 1-9.
[56] Kingsbury B F K, Wu Zhentao, Li K. A morphological study of ceramic hollow fiber membranes:a perspective on multifunctional catalytic membrane reactors[J]. Catal Today, 2010, 156(3): 306-315.
[57] 曾美云, 王树森, 王志忠,等. 管式硅基裂解膜陶瓷支撑体的制备[J]. 北京工业大学学报, 2000, 26(1): 68-71.
[58] Liu Y, Li K. Preparation of SrCe0.95Yb0.05O3 ɑ-hollow fibre membranes:Study on sintering processes[J]. J Membr Sci, 2005, 259(1-2): 47-54.
[59] 漆 虹, 范益群, 徐南平. 保温时间对低温烧成多孔氧化铝支撑体性能影响的研究[J]. 膜科学与技术, 2001, 21(6): 5-10.
[60] Wu Zhentao, Wang Bo, Li K. A novel dual-layer ceramic hollow fibre membrane reactor for methane conversion[J]. J Membr Sci, 2010, 352(1): 63-70.
[61] Ha J H, Oh E, Bae B, et al. The effect of kaolin addition on the characteristics of a sintered diatomite composite support layer for potential micro-filtration applications[J]. Ceram Int, 2013, 39(8): 8955-8962.
[62] 杨 柯, 常启兵, 王 霞,等. 高岭土为助烧剂制备多孔陶瓷膜支撑体[J]. 中国陶瓷, 2012, 49(8): 24-27.

服务与反馈：
【文章下载】【加入收藏】

《膜科学与技术》编辑部 地址：北京市朝阳区北三环东路19号蓝星大厦 邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com

京公网安备11011302000819号