乙烯基PDMS/PSF复合膜及其乙醇/水分离性能研究 |
作者:张国军,王乃鑫,李杰,闫浩,纪树兰 |
单位: 北京工业大学环境与能源工程学院,北京 100124 |
关键词: 乙烯基聚二甲基硅氧烷;渗透汽化;复合膜;分离性能 |
DOI号: |
分类号: TQ028.8 |
出版年,卷(期):页码: 2016,36(4):103-109 |
摘要: |
采用浸渍法将不同端基的聚二甲基硅氧烷(PDMS)复合在聚砜基膜表面形成分离层,从而制备优先透醇渗透汽化复合膜。利用扫描电镜与接触角仪对复合膜表面的形貌和疏水性进行了表征,结果表明复合膜表面均致密均匀无缺陷,并且乙烯基PDMS(Vi-PDMS)复合膜具有更好的疏水性。通过对比两种不同端基PDMS复合膜的溶胀度以及成膜湿度对其性能的影响,发现Vi-PDMS复合膜比羟基PDMS(OH-PDMS)复合膜具有更好的耐溶胀性和抗湿性。考察了铸膜液中Vi-PDMS含量、进料液中乙醇浓度以及进料液温度对复合膜渗透汽化分离性能的影响。结果表明,当铸膜液中Vi-PDMS浓度为15wt%,进料液中乙醇浓度为5wt%,料液温度为60℃时,复合膜的渗透通量为857.1g/(m2•h),分离因子为8.9。通过对复合膜的长期稳定性考察,表明该复合膜在700h内可稳定运行,具有一定的应用前景。 |
The vinyl PDMS (Vi-PDMS) and hydroxyl PDMS(OH-PDMS) were used to prepare PDMS/PSFcomposite membranesfor ethanol permselectivepervaporation via dip-coating method. Themorphology and hydrophobicity of the membranes were characterized by scanning electron microscopy (SEM) andcontact angle (CA), respectively. The results showed that the surfaceof Vi-PDMS/PScomposite membraneswere defect-freewithgood hydrophobicity. The swelling degrees and effect of humidity on pervaporation performance of the different PDMS composite membranes were compared. It is demonstrated that the Vi-PDMS composite membrane had better resistance to swelling and humidity than the OH-PDMS composite membrane. Therefore, the Vi-PDMS composite membrane has a potential application in ethanol permselectivepervaporation. The effects of casting solution concentration, feed concentration,and feed temperatureon the separation performance of the membranes were investigated. When the feed solution is 5wt% ethanol/water mixtures at 60 °C, the total permeate flux and separation factor were857.1g/(m2•h) and 8.9 respectively.Moreover, the composite membrane had a stable separation performance in 700 h, which indicated that it has a potential in industry. |
基金项目: |
国家“863”计划资助项目(2012AA03A607);国家自然科学基金资助项目(21176007) |
作者简介: |
作者简介:张国军(1989—),男,河北沧州人,硕士研究生,主要从事膜分离技术与应用方面的研究E-mail:hnzhangguojun@emails.bjut.edu.cn* 联系人E-mail:jshl@bjut.edu.cn |
参考文献: |
[1] Vane L M. A review of pervaporation for product recovery from biomass fermentation processes[J]. J ChemTechnolBiotechnol, 2005, 80: 603-629. [2] Kang C H, Lin Y F, Huang Y S, et al. Synthesis of ZIF-7/chitosan mixed-matrix membranes with improved separation performance of water/ethanol mixtures[J]. J MembrSci, 2013, 483: 105-111. [3] Liu D Y, Liu G P, Meng L, et al. Hollow fiber modules with ceramic-supported PDMS composite membranes for pervaporation recovery of bio-butanol[J]. Sep PurifTechnol, 2015, 146: 24-32. [4] Wu T, Wang N X, Li J, et al. Tubular thermal crosslinked-PEBA/ceramic membrane for aromatic/aliphatic pervaporation[J]. J MembrSci, 2015, 486: 1-9. [5] 韩秋,周浩力,刘公平,等. PDMS/PVDF复合膜分离VOC/N2 的研究性能[J]. 膜科学与技术, 2015, 35(1): 75-81. [6] Han X L, Wang L, Li J D, et al.Separation of Ethanol from Ethanol/Water Mixtures by Pervaporation with Silicone Rubber Membranes: Effect of Silicone Rubbers[J]. J ApplPolym Sci.2011, 119: 3413-3421. [7] Liu G P, Gan L, Liu S N, et al. PDMS/ceramic composite membrane for pervaporation separation of acetone–butanol–ethanol (ABE) aqueous solutions and its application in intensification of ABE fermentation process[J].ChemEng Process, 2014, 86: 162-172. [8] 王蕾,李继定,韩小龙. 双组分加成型硅橡胶膜制备及其渗透汽化分离碳酸二甲酯/甲醇[J]. 化工进展, 2009, 28: 134-137. [9] 徐小辉,田霖,刘爱民,等. 加成型液体硅橡胶概述[J]. 弹性体, 2006, 16(2): 69-72. [10] 戚云霞,赵士贵,姜伟峰,等. 加成型室温硫化硅橡胶的研究进展[J]. 有机硅材料, 2006, 20(1): 34-37. [11] Wang R, Shan L L, Zhang G J, et al. Multiple sprayed composite membranes with high flux for alcohol permselectivepervaporation[J]. J MembrSci, 2013, 432: 33-41. [12] Zhang G J, Li J, Wang N X, et al. Enhancedflux of polydimethylsiloxane membrane for ethanol permselectivepervaporation via incorporation of MIL-53 particles[J]. J MembrSci, 2015, 492: 322-330. |
服务与反馈: |
【文章下载】【加入收藏】 |
《膜科学与技术》编辑部 地址:北京市朝阳区北三环东路19号蓝星大厦 邮政编码:100029 电话:010-64426130/64433466 传真:010-80485372邮箱:mkxyjs@163.com
京公网安备11011302000819号