膜科学与技术

位置：首页 >> 期刊内容阅读

热处理条件对煤基陶瓷-炭复合膜性能的影响

作者：秦志宏，宋兆兰，陈冬梅，曹丹，李苗苗

单位：（中国矿业大学江苏徐州 221116）

关键词：陶瓷-炭复合膜；炭化工艺条件；渗透率；截留率；热演化及机理

DOI号：

分类号： TQ536，TQ536.1

出版年,卷(期):页码： 2017,37(2):78-87

摘要：

以煤萃取反萃取法分离所得密中质组分溶胶为涂覆液，经成膜和炭化，成功制备了煤基陶瓷-炭复合膜。研究了炭化条件对制备的复合膜性能的影响，考察了复合膜的孔隙率、纯水渗透率以及对Fe(OH)3胶体和牛血清蛋白溶胶(BSA)的截留率与炭化工艺条件的关系，探讨了分离层的热演化过程与机理。结果表明：炭化过程中的升温速率、中间恒温温度、中间恒温时间和炭化终温均会影响分离层热解气体和液相的生成速率以及黏连固相成为胶质体的状况，进而影响分离层的孔隙结构和分布，并最终影响所制复合膜的孔隙率、渗透率和截留率；对Fe(OH)3胶体具有较好截留效果的炭化条件为：升温速率4℃/min，中间恒温温度和时间为460℃和20min，炭化终温600℃；对BSA溶胶具有较好截留效果的炭化条件为：升温速率4℃/min，中间恒温温度和时间为490℃和20min，炭化终温为800℃。密中质组分的特定组成结构使其在热解炭化过程中主要生成胶质体液相物质和气态产物，基本不产生膨胀作用，这一特性非常有利于密中质组制备复合膜分离层。

The sol of the coal dense medium component which was produced by the extraction and stripping method was chosen as the coating solution. Through the filming and charring, it was successfully prepared as coal-based ceramics-carbon composite membranes. The carbonization conditions on the performance of the composite membrane prepared was studied, and the relationship between the carbonization process conditions and the composite membrane porosity, water permeability as well as rejection rate of the Fe(OH)3 colloidal and bovine serum albumin (BSA) sol was inspected. Then thermal evolution process and mechanism of the separation layer was discussed. The results show that: the heating rate, intermediate constant temperature, the intermediate holding time and final carbonization temperature in the carbonization process will affect the generation rate of the separation layer pyrolytic gas and liquid, as well as the state of adhering the solid becoming metaplast, thereby affect to the composite carbon membrane separation layer pore structure and distribution, and ultimately affect porosity, permeability and retention rate of the composite membrane; under the following carbonization process conditions: heating rate with 4 oC/min, intermediate constant temperature and time respectively at 460 oC and 20 min, final carbonization temperature at 600 oC, the composite membrane have better retention rate effect on Fe(OH)3 colloids; under the following carbonization process conditions: heating rate with 4 oC/min, intermediate constant temperature and time respectively at 490 oC and 20 min, final carbonization temperature at 800 oC, the composite membrane have better entrapped results on the BSA sol. The coal dense medium component major generates liquid and gas phase material in pyrolysis carbonization process due to its specific composite structure, and substantially no swelling effect in the process, this feature is very conducive to prepare composite membrane separation layer by the coal dense medium component.

基金项目：

国家自然科学基金（51274201、51674260）；教育部高等学校博士学科点专项科研基金（20130095110006）

作者简介：

作者简介：秦志宏（1963-），男，安徽安庆人，博士，教授。从事煤转化技术方面研究。电话:13852034193, 邮箱 : qinzh1210@163.com

参考文献：

[1] 朱桂茹，王同华，李家刚，等．炭膜研究的新进展[J]．炭素技术，2002，4：22-27．
[2] 刘作华，杜军，李晓红，等．炭膜的制备及应用[J]．重庆大学学报，2007，27（2）：63-67．
[3] 宋成文，邱英华，王同华，等.成膜条件对聚丙烯腈炭膜性能的影响[J].化工新型，2007，35（11）：45-46.
[4] 王同华，魏微，刘淑琴，尤隆渤，等 .管状多孔炭膜的研究[J].新型炭材料，2000，15（1）：6-10.
[5] 刘颖.管式复合炭膜的制备及气体分离性能[D].大连：大连理工大学，2009.
[6] Rao M B，Sircar S. Performance and pore characterization of nanoporous carbon membranes for gas separation[J]. J Mermbr Sci，1996，110(1):109-118.
[7] Fuertes A B. Adsorption-selective carbon membrane for gas separation[J]. J Mermbr Sci，2000，177:9-10.
[8] 王树森,曾美云,王志忠.分子筛炭膜的形态结构研究[J].北京工业大学学报,1995,21,(4):90—96.
[9] 陈冬梅，秦志宏，李新艳，等. 基于煤沥青质族组分的陶瓷-炭复合膜制备[J]，化工新型材料，2012，40(12):40-51.
[10] ZHANG L Y，QIN Z H，LI X Y，et al. Preparation and characterization of a composite membrane based on asphaltene component of coal[J]. Min Sci Tech，2011, 21(3):407-411.
[11] QIN Z H，HOU C L，CHEN J，et al. Group separation of coal components and new ideas of coal utilization as petroleum[J]. Min Sci Tech，2009，19(5):636-641.
[12] 秦志宏，巩涛，李兴顺，等.煤萃取过程的TEM分析与煤嵌布结构模型[J]. 中国矿业大学学报,2008，37(4)：443-448.
[13] 黄仲涛，曾昭槐，钟邦克，等.无机膜技术及其应用[M]．北京：中国石化出版社，1999：142-145.
[14] 马玲玲.分离煤族组分制备泡沫炭及泡孔结构调制[D].徐州：中国矿业大学，2014.

服务与反馈：

【文章下载】【加入收藏】

《膜科学与技术》编辑部地址：北京市朝阳区北三环东路19号蓝星大厦邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com