多嵌段磺化聚醚砜质子交换膜材料的制备及性能研究
作者:谢伟芳
单位: 江苏开放大学??环境与生态学院??江苏210036
关键词: 多嵌段聚合物;聚醚砜;质子交换膜;甲醇燃料电池
出版年,卷(期):页码: 2018,38(6):63-68

摘要:
 本文制备了出了一系列磺化度为44.6%、49.7%和54.4%的磺化-非磺化四嵌段聚芳醚砜材料,并将其用于直接甲醇燃料电池的质子交换膜。这种四嵌段聚芳醚砜薄膜具有互穿网络微观结构,亲-疏水相分离尺度较小。与具有类似结构的两嵌段聚芳醚砜相比,其质子传导相关性能更为优异。随温度和磺化度升高,所制备的质子交换膜的吸水率、甲醇透过率、离子交换容量和质子传导率均升高。当温度为90 ℃,磺化度为54.4%时,相应薄膜的质子传导率较高,为9.4 mS/cm,且甲醇透过率依然较低,仅为3.80×10-8 L/m·s。
 A series of multi-block sulfonated polyethersulfone with various sulfonation degree of 44.6%, 49.7% and 55.4% were synthesized, which were thus prepared as proton exchange membrane in direct methanol fuel cell. A type of interpenetrating networks was observed in these four-block sulfonated polyethersulfone membranes. Therefore, compared with the two-block sulfonated polyethersulfone, these prepared four-block sulfonated polyethersulfone membranes exhibited improved proton conduction performance. As the temperature and sulfonation degree increased, the water absorption, methanol transmissivity, ion exchange capacity and proton conductivity of the prepared proton exchange membrane were also increased. When the temperature was 90 °C, sulfonation degree was 55.4%, the proton conductivity of the corresponding membrane was as high as 9.38×10-3 S/cm, and the methanol transmittance was relatively low as 3.80×10-8 L/m·s.
第一作者简介:谢伟芳(1984.3——),?男?,福建莆田,汉?,硕士,实验师,研究方向:水处理 邮箱:847794004@qq.com

参考文献:
 [1]Wang W, Shan B, Zhu L, et al. Anatase titania coated CNTs and sodium lignin sulfonate doped chitosan proton exchange membrane for DMFC application[J]. Carbohydrate Polymers, 2018, 187:35-42.
[2]张永明, 唐军桐, 袁望章. 燃料电池全氟磺酸质子交换膜研究进展[J]. 膜科学与技术, 2011, 31(3):76-85.
[3]Daigle J C, Dube-Savoie V, Tavares A C, et al. Copolymers of Ethylene and Sulfonated Norbornene as Proton Exchange Membranes[J]. Journal of Polymer Science Part A Polymer Chemistry, 2013, 51(12):2669-2676. 
[4]Chen L, Wang X, He X, et al. Vinyl‐addition type norbornene copolymer containing sulfonated biphenyl pendant groups for proton exchange membranes[J]. Journal of Applied Polymer Science, 2014, 127(3):2280-2289.
[5]Muthumeenal A, Neelakandan S, Kanagaraj P, et al. Synthesis and properties of novel proton exchange membranes based on sulfonated polyethersulfone and N-phthaloyl chitosan blends for DMFC applications[J]. Renewable Energy, 2016, 86:922-929.
[6]秦瑞红, 孟晓宇, 魏鹏,等. 磺化聚醚醚酮/多壁碳纳米管复合质子交换膜的制备与性能[J]. 膜科学与技术, 2015, 35(4):29-34.
[7]张守海, 赵文颖, 陈丽云,等. 磺化含侧苯基杂萘联苯聚醚砜质子交换膜材料的合成与性能[J]. 功能材料, 2013, 44(18):2633-2637.
[8]聂发文. PGA纳米纤维改性磺化聚醚砜质子交换膜的制备与性能研究[D]. 天津:天津工业大学, 2017.
[9]Dai H, Guan R, Wang L. The Research Progress of Sulfonated Polysulfone Proton Exchange Membrane for Fuel Cells[J]. Progress in Chemistry, 2006, 18(1):36-44.
[10]陶应勇, 张虚略, 胡朝霞,等. 侧链型含氟磺化聚醚砜/磺化聚酰亚胺共混质子交换膜的制备及性能[J]. 高等学校化学学报, 2016, 37(4):793-800.
[11]王迎姿, 尚玉明, 冯少广,等. 磺化聚苯并咪唑/磺化聚醚砜酸碱复合质子交换膜的制备与表征[J]. 化工进展, 2010, 29(5):843-846.
[12]Sang H K, Chang G C. Synthesis and characterization of well defined polysulfone- g -poly(styrenesulfonic acid) graft copolymers for proton exchange membrane[J]. Macromolecular Research, 2011, 19(11):1142.
[13]Li Y, Zhang X, He G, et al. Sulfonated poly(phenylene sulfide) grafted polysulfone proton exchange membrane with improved stability[J]. International Journal of Hydrogen Energy, 2017, 42(4):2360-2369.
[14]薛童. 磺化嵌段聚醚砜质子交换膜的制备及改性[D]. 南京:南京理工大学, 2015.
[15]Yang Y, Shi Z, Holdcroft S. Synthesis of Sulfonated Polysulfone-block-PVDF Copolymers: Enhancement of Proton Conductivity in Low Ion Exchange Capacity Membranes[J]. Macromolecules, 2004, 37(5): 1678-1681.
[16]Sankir M, Bhanu V A, Harrison W L, et al. Synthesis and characterization of 3,3′-disulfonated-4,4′-dichlorodiphenyl sulfone (SDCDPS) monomer for proton exchange membranes (PEM) in fuel cell applications[J]. Journal of Applied Polymer Science, 2006, 100(6):4595-4602.

服务与反馈:
文章下载】【加入收藏

《膜科学与技术》编辑部 地址:北京市朝阳区北三环东路19号蓝星大厦 邮政编码:100029 电话:010-64426130/64433466 传真:010-80485372邮箱:mkxyjs@163.com

京公网安备11011302000819号