PVDF超疏水微孔膜调控研究
作者:张仁伟,刘四华,汤超,厍景国,武春瑞,吕晓龙
单位: 省部共建分离膜与膜过程国家重点实验室,材料科学与工程学院,天津工业大学,天津300387
关键词: 聚偏氟乙烯;疏水膜;非溶剂致相分离;预蒸发时间;非溶剂添加剂
DOI号:
分类号: TQ028.8
出版年,卷(期):页码: 2020,40(3):7-13

摘要:
提高疏水膜表面的疏水性是降低其应用过程中润湿风险的有效方法。为了便捷有效的调控膜结构从而提高膜的疏水性,采用非溶剂致相分离法,以水作为非溶剂添加剂,希望通过调节初生膜的预蒸发时间这一最便捷的手段,调控膜的结构及疏水性。结果表明,随着预蒸发时间的延长,铸膜液粘度增加,有利于膜表面凝胶化的形成,从而在膜表面构建出均一超疏水结构。当预蒸发时间达到120 s时,膜表面的水接触角达到151.2 °,膜的气体渗透通量为40.9 mL/(m2?s?Pa),透水压力达到65.3 kPa。
Improving the hydrophobicity of hydrophobic membrane surface was an effective way to reduce the wetting risk during its application. In order to control the membrane structure conveniently and effectively and improve the hydrophobicity of the membrane, H2O was added to the dope solution as non-solvent additive by non-solvent induced phase separation method. It was hoped that the membrane structure and hydrophobicity can be controlled by adjusting the pre-evaporation time of primary membrane. The results show that with the increase of pre-evaporation time, the viscosity of the dope solution increased, which was conducive to the formation of gelation on the surface of the membrane, thereby creating a uniform super-hydrophobic structure on the membrane surface. When the pre-evaporation time reached 120 s, the water contact angle of the membrane was 151.2 °, the gas permeation flux of the membrane was 40.9 mL/(m2?s?Pa), and the LEP value was 65.3 kPa.

基金项目:
国家自然科学面上基金项目(51578376)

作者简介:
第一作者简介:张仁伟(1995-),男,安徽马鞍山人,硕士,从事PVDF疏水膜制备 通讯作者,E-mail:wuchunrui@tjpu.edu.cn;13920286131@163.com

参考文献:
[1] Wang N, Zhai Y, Yang Y, et al. Electrostatic assembly of superwetting porous nanofibrous membrane toward oil-in-water microemulsion separation[J]. Chem Eng J, 2018, 354: 463-472.
[2] Agbaje T A, Al-gharabli S, Mavukkandy M O, et al. PVDF/magnetite blend membranes for enhanced flux and salt rejection in membrane distillation[J]. Desalination, 2018, 436: 69-80.
[3] Liu K, Huang Z, Hemmatifar A, et al. Self-Cleaning Porous Surfaces for Dry Condensation[J]. ACS Appl Mater Inter, 2018, 10(31): 26759-26764.
[4] Khayet M, Mengual J I, Matsuura T. Porous hydrophobic/hydrophilic composite membranes: Application in desalination using direct contact membrane distillation[J]. J Membr Sci, 2005, 252(1): 101-113.
[5] Kang G-D, Cao Y-M. Application and modification of poly(vinylidene fluoride) (PVDF) membranes - A review[J]. J Membr Sci, 2014, 463: 145-165.
[6] Xu S, Ren L-F, Zhou Q, et al. Facile ZIF-8 functionalized hierarchical micronanofiber membrane for high-efficiency separation of water-in-oil emulsions[J]. J Appl Polym Sci, 2018, 135(27): 46462-46470.
[7] Munirasu S, Banat F, Durrani A A, et al. Intrinsically superhydrophobic PVDF membrane by phase inversion for membrane distillation[J]. Desalination, 2017, 417: 77-86..
[8] Hou D, Wang J, Sun X, et al. Preparation and properties of PVDF composite hollow fiber membranes for desalination through direct contact membrane distillation[J]. J Membr Sci, 2012, 405: 185-200.
[9] Baghbanzadeh M, Rana D, Matsuura T, et al. Effects of hydrophilic CuO nanoparticles on properties and performance of PVDF VMD membranes[J]. Desalination, 2015, 369: 75-84.
[10] Baghbanzadeh M, Rana D, Lan C Q, et al. Effects of hydrophilic silica nanoparticles and backing material in improving the structure and performance of VMD PVDF membranes[J]. Sep Purif Technol, 2016, 157: 60-71.
[11] Chang H-H, Chang L-K, Yang C-D, et al. Effect of polar rotation on the formation of porous poly(vinylidene fluoride) membranes by immersion precipitation in an alcohol bath[J]. J Membr Sci, 2016, 513: 186-196.
[12] 吕晓龙. 中空纤维多孔膜性能评价方法探讨[J]. 膜科学与技术, 2011, 31(02): 1-6.
[13] Schneider K, H Lz W, Wollbeck R, et al. Membranes and modules for transmembrane distillation[J]. J Membr Sci, 1988, 39(1): 25-42.
[14] Jung J T, Wang H H, Kim J F, et al. Tailoring nonsolvent-thermally induced phase separation (N-TIPS) effect using triple spinneret to fabricate high performance PVDF hollow fiber membranes[J]. J Membr Sci, 2018, 559: 17-26.
[15] Gregorio R. Determination of the alpha, beta, and gamma crystalline phases of poly(vinylidene fluoride) films prepared at different conditions[J]. J Appl Polym Sci, 2006, 100(4): 3272-3279.

服务与反馈:
文章下载】【加入收藏

《膜科学与技术》编辑部 地址:北京市朝阳区北三环东路19号蓝星大厦 邮政编码:100029 电话:010-64426130/64433466 传真:010-80485372邮箱:mkxyjs@163.com

京公网安备11011302000819号